This port fuel injector service kit includes filters, pintle caps, spacers and orings. This kit will service the Bosch type one (single pintle style) and Bosch type two (this is the injector with the 4 small round discharge holes spaced closely together) fuel injectors. Also included  are installation tips. The injector in the picture is for illustration only and is not included.

Parts Included
10 Brown Viton Orings .296 ID x .139 THK
5 Spacers The color is yellow. .078 THK x .329 ID
5 Pintle Caps Yellow standard universal pintle cap. 1.5mm hole supports all type one and type two injectors with single pintle or type two with the four small round discharge holes.
5 Filters Universal Bosch 10 micron filter with brass crush ring. Crush ring OD .239 x .474 length
Installation Tips

This port fuel injector service kit includes filters, pintle caps, spacers and orings. This kit will service the Bosch type one (single pintle style) and Bosch type two (this is the injector with the 4 small round discharge holes spaced closely together) fuel injectors. Also included  are installation tips. The injector in the picture is for illustration and is not included.

Parts Included
18 Brown Viton Orings .296 ID x .139 THK
9 Spacers The color is yellow. .078 THK x .329 ID
9 Pintle Caps Yellow standard universal pintle cap. 1.5mm hole supports all type one and type two injectors with single pintle or type two with the four small round discharge holes.
9 Filters Universal Bosch 10 micron filter with brass crush ring. Crush ring OD .239 x .474 length
Installation Tips

This listing is for one 4 cylinder port fuel injector service kit. This kit will service the Bosch type 3 fuel injector. The kit includes pintle caps, orings and filters as well as a set of installation instructions.



Kit Includes The Following:                   
5 Type 3 pintle caps
5 Filters with brash crush ring OD .239 x .474 long - 10 micron
10 Brown viton o-ring. .296 ID x .139 THK
1 set of installation Instructions
Kit services the type 3 injectors 280-155-*** series
NOTE: See the picture for the type of injector this kit services. Injector is not included.

This listing is for one 6 cylinder port fuel injector service kit. This kit will service the Bosch type 3 fuel injector. The kit includes pintle caps, orings and filters as well as a set of installation instructions.


Kit Includes The Following:               
7 Type 3 pintle caps
7 Filters with brash crush ring OD .239 x .474 long - 10 micron
14 Brown viton o-ring. .296 ID x .139 THK
1 set of installation Instructions
Kit services the type 3 injectors 280-155-*** series
NOTE: See the picture for the type of injector this kit services. Injector is not included.

This listing is for one 8 cylinder port fuel injector service kit. This kit will service the Bosch type 3 fuel injector. The kit includes pintle caps, orings and filters as well as a set of installation instructions.


Kit Includes The Following:        
9 Type 3 pintle caps
9 Filters with brash crush ring OD .239 x .474 long - 10 micron
18 Brown viton o-ring. .296 ID x .139 THK
1 set of installation Instructions
Kit services the type 3 injectors 280-155-*** series
NOTE: See the picture for the type of injector this kit services. Injector is not included.

This listing is for one 8 cylinder port fuel injector service kit. This kit will service the Bosch type 3 fuel injector. The kit includes pintle caps, orings and filters as well as a set of installation instructions.



Kit Includes The Following:     
11 Type 3 pintle caps
11 Filters with brash crush ring OD .239 x .474 long - 10 micron
20 Brown viton o-ring. .296 ID x .139 THK
1 set of installation Instructions
Kit services the type 3 injectors 280-155-*** series
NOTE: See the picture for the type of injector this kit services. Injector is not included.

GM Delphi Multec 2 Port Fuel Injector Service Kit

This listing is for one 4 cylinder port fuel injector service kit. This kit will service the Delphi Multec 2 fuel injector. The kit includes pintle caps, orings and filters as well as a set of installation instructions.

Kit Includes The Following:
5 Delphi pintle caps
5 Filters with brash crush ring OD .239 x .474 long - 10 micron
5 Brown viton o-ring. .296 ID x .139 THK
5 Black viton lower oring .368ID x .100 THK
Filter extraction screw
1 set of installation Instructions
Kit services the Delphi Multec 2 fuel injector
NOTE: See the picture for the type of injector this kit services. Injector is not included.

GM Delphi Multec 2 Port Fuel Injector Service Kit 6 Cylinder

This listing is for one 6cylinder port fuel injector service kit. This kit will service the Delphi Multec 2 fuel injector. The kit includes pintle caps, orings and filters as well as a set of installation instructions.

Kit Includes The Following:
7 Delphi pintle caps
7 Filters with brash crush ring OD .239 x .474 long - 10 micron
7 Brown viton o-ring. .296 ID x .139 THK
7 Black viton lower oring .368ID x .100 THK
Filter extraction screw
1 set of installation Instructions
Kit services the Delphi Multec 2 fuel injector
NOTE: See the picture for the type of injector this kit services. Injector is not included. 

GM Delphi Multec 2 Port Fuel Injector Service Kit 8 Cylinder

This listing is for one 8cylinder port fuel injector service kit. This kit will service the Delphi Multec 2 fuel injector. The kit includes pintle caps, orings and filters as well as a set of installation instructions.


Kit Includes The Following:
9 Delphi pintle caps
9 Filters with brash crush ring OD .239 x .474 long - 10 micron
9 Brown viton o-ring. .296 ID x .139 THK
9 Black viton lower oring .368ID x .100 THK
Filter extraction screw
1 set of installation Instructions
Kit services the Delphi Multec 2 fuel injector
NOTE: See the picture for the type of injector this kit services. Injector is not included.

Rochester Multec Fuel Injector Service Kit 4 Cylinder

This port fuel injector service kit includes filters and orings. This kit will service the Rochester Multec fuel injectors.  Also included  are installation tips. The injector in the picture is for illustration and is not included.

Parts Included
10 Brown Viton Orings .296 ID x .139 THK
5 Filters Universal Bosch 10 micron filter with brass crush ring. Crush ring OD .239 x .474 length
Installation Tips

Rochester Multec Fuel Injector Service Kit 6 Cylinder

This port fuel injector service kit includes filters and orings. This kit will service the Rochester Multec fuel injectors.  Also included  are installation tips. The injector in the picture is for illustration and is not included.

Parts Included
14 Brown Viton Orings .296 ID x .139 THK
7 Filters Universal Bosch 10 micron filter with brass crush ring. Crush ring OD .239 x .474 length
Installation Tips

Rochester Multec Fuel Injector Service Kit 8 Cylinder

This port fuel injector service kit includes filters and orings. This kit will service the Rochester Multec fuel injectors.  Also included  are installation tips. The injector in the picture is for illustration and is not included.

Parts Included
18 Brown Viton Orings .296 ID x .139 THK
9 Filters Universal Bosch 10 micron filter with brass crush ring. Crush ring OD .239 x .474 length
Installation Tips

Deka Siemens Fuel Injector Service Kit 4 Cylinder

This port fuel injector service kit includes filters and orings. This kit will service the Deka Siemens fuel injectors.  Also included  are installation tips. The injector in the picture is for illustration and is not included.

Parts Included
10 Brown Viton Orings .296 ID x .139 THK
5 Filters Universal Bosch 10 micron filter with brass crush ring. Crush ring OD .239 x .474 length
Installation Tips

Deka Siemens Fuel Injector Service Kit 6 Cylinder

This port fuel injector service kit includes filters and orings. This kit will service the Deka Siemens fuel injectors.  Also included  are installation tips. The injector in the picture is for illustration and is not included.

Parts Included
14 Brown Viton Orings .296 ID x .139 THK
7 Filters Universal Bosch 10 micron filter with brass crush ring. Crush ring OD .239 x .474 length
Installation Tips

 Deka Siemens Fuel Injector Service Kit 8 Cylinder

This port fuel injector service kit includes filters and orings. This kit will service the Deka Siemens fuel injectors.  Also included  are installation tips. The injector in the picture is for illustration and is not included.

Parts Included
18 Brown Viton Orings .296 ID x .139 THK
9 Filters Universal Bosch 10 micron filter with brass crush ring. Crush ring OD .239 x .474 length
Installation Tips

Fuel Injector Service Kit Toyota & Imports Denso 4 Cyl

This port fuel injector service kit includes filters, pintle caps, grommets and orings for the ND Nippon Denso fuel injectors used on Toyota, Mazda and many other import applications. I have included dimensions on the parts and an illustration so you can verify this kits application.  Also included  are installation tips. The injector in the picture is for illustration and is not included.

Parts Included
4 Filters - Crush Ring OD .238 Length .473
4 Fuel Orings - .071 Thick x .312 ID
4 Upper Grommets - .374 ID x .212 Thick
4 Pintle Caps - .331 ID x .552 Length x .177 Discharge Hole (NOTE: This cap works on double and single hole injectors)
4 Intake Seal - .369 ID x .214 Thick x .625 OD

Fuel Injector Service Kit Toyota & Imports Denso 6 Cyl

This port fuel injector service kit includes filters, pintle caps, grommets and orings for the ND Nippon Denso fuel injectors used on Toyota, Mazda and many other import applications. I have included dimensions on the parts and an illustration so you can verify this kits application.  Also included  are installation tips. The injector in the picture is for illustration and is not included.

Parts Included
6 Filters - Crush Ring OD .238 Length .473
6 Fuel Orings - .071 Thick x .312 ID
6 Upper Grommets - .374 ID x .212 Thick
6 Pintle Caps - .331 ID x .552 Length x .177 Discharge Hole (NOTE: This cap works on double and single hole injectors)
6 Intake Seal - .369 ID x .214 Thick x .625 OD

Fuel Injector Service Kit Toyota & Imports Denso 8 Cyl

This port fuel injector service kit includes filters, pintle caps, grommets and orings for the ND Nippon Denso fuel injectors used on Toyota, Mazda and many other import applications. I have included dimensions on the parts and an illustration so you can verify this kits application.  Also included  are installation tips. The injector in the picture is for illustration and is not included.

Parts Included
8 Filters - Crush Ring OD .238 Length .473
8 Fuel Orings - .071 Thick x .312 ID
8 Upper Grommets - .374 ID x .212 Thick
8 Pintle Caps - .331 ID x .552 Length x .177 Discharge Hole (NOTE: This cap works on double and single hole injectors)
8 Intake Seal - .369 ID x .214 Thick x .625 OD

This port fuel injector service kit  includes filters, pintle caps, grommets and orings for the ND Nippon Denso fuel injectors used on Toyota, Mazda and many other import applications. I have included dimensions on the parts and an illustration so you can verify this kits application.  Also included  are installation tips. The injector in the picture is for illustration and is not included.This kit is for the early ND EV1 injectors. The EV1 has a square electrical plug.

Parts Included

    * 4 Filters - Crush Ring OD .238 Length .473
    * 4 Fuel Orings - .071 Thick x .312 ID
    * 4 Upper Grommets - .374 ID x .212 Thick
    * 4 Pintle Caps - .303 ID x .552 Length x .070 Discharge Hole
    * 4 Intake Seal - .369 ID x .214 Thick x .625 OD

This port fuel injector service kit  includes filters, pintle caps, grommets and orings for the ND Nippon Denso fuel injectors used on Toyota, Mazda and many other import applications. I have included dimensions on the parts and an illustration so you can verify this kits application.  Also included  are installation tips. The injector in the picture is for illustration and is not included.This kit is for the early ND EV1 injectors. The EV1 has a square electrical plug.

Parts Included

    * 6 Filters - Crush Ring OD .238 Length .473
    * 6 Fuel Orings - .071 Thick x .312 ID
    * 6 Upper Grommets - .374 ID x .212 Thick
    * 6 Pintle Caps - .303 ID x .552 Length x .070 Discharge Hole
    * 6 Intake Seal - .369 ID x .214 Thick x .625 OD

This port fuel injector service kit includes filters,  BMW fin style pintle caps, spacers and orings.  Also included  are installation tips. The injector in the picture is for illustration and is not included.


Important Note: There are two types of fin caps depending on the injector. If you have an injector with a single pintle pin use the cap with the 1.5 discharge hole. If you have an injector with 4 small discharge holes use the cap with the 3mm discharge hole. Make a note at check out in the notes to seller box indicating 1.5 caps or 3.0 caps. If there is no note you will receive the 1.5 caps by default.

Parts Included

    * 10 Brown Viton Orings .296 ID x .139 THK
    * 5 Spacers The color is yellow. .078 THK x .329 ID
    * 5 BMW Fin Style Pintle Caps.
    * 5 Filters Universal Bosch 10 micron filter with brass crush ring. Crush ring OD .239 x .474 length
    * Installation Tips

This port fuel injector service kit includes filters,  BMW fin style pintle caps, spacers and orings.  Also included  are installation tips. The injector in the picture is for illustration and is not included.


Important Note: There are two types of fin caps depending on the injector. If you have an injector with a single pintle pin use the cap with the 1.5 discharge hole. If you have an injector with 4 small discharge holes use the cap with the 3mm discharge hole. Make a note at check out in the notes to seller box indicating 1.5 caps or 3.0 caps. If there is no note you will receive the 1.5 caps by default.

Parts Included

    * 14 Brown Viton Orings .296 ID x .139 THK
    * 7 Spacers The color is yellow. .078 THK x .329 ID
    * 7 BMW Fin Style Pintle Caps.
    * 7 Filters Universal Bosch 10 micron filter with brass crush ring. Crush ring OD .239 x .474 length
    * Installation Tips

This port fuel injector service kit includes filters,  BMW fin style pintle caps, spacers and orings.  Also included  are installation tips. The injector in the picture is for illustration and is not included.


Important Note: There are two types of fin caps depending on the injector. If you have an injector with a single pintle pin use the cap with the 1.5 discharge hole. If you have an injector with 4 small discharge holes use the cap with the 3mm discharge hole. Make a note at check out in the notes to seller box indicating 1.5 caps or 3.0 caps. If there is no note you will receive the 1.5 caps by default.

Parts Included

    * 18 Brown Viton Orings .296 ID x .139 THK
    * 9 Spacers The color is yellow. .078 THK x .329 ID
    * 9 BMW Fin Style Pintle Caps.
    * 9 Filters Universal Bosch 10 micron filter with brass crush ring. Crush ring OD .239 x .474 length
    * Installation Tips

This port fuel injector service kit includes filters,  BMW fin style pintle caps, spacers and orings.  Also included  are installation tips. The injector in the picture is for illustration and is not included.



Important Note: There are two types of fin caps depending on the injector. If you have an injector with a single pintle pin use the cap with the 1.5 discharge hole. If you have an injector with 4 small discharge holes use the cap with the 3mm discharge hole. Make a note at check out in the notes to seller box indicating 1.5 caps or 3.0 caps. If there is no note you will receive the 1.5 caps by default.

Parts Included

    * 26 Brown Viton Orings .296 ID x .139 THK
    * 13 Spacers The color is yellow. .078 THK x .329 ID
    * 13 BMW Fin Style Pintle Caps.
    * 13 Filters Universal Bosch 10 micron filter with brass crush ring. Crush ring OD .239 x .474 length
    * Installation Tips

This listing is for one 4cylinder port fuel injector service kit. This kit will service the Denso Toyota top feed fuel injector. The kit includes filters, orings, intake seals, as well as a set of installation instructions.

Kit Includes The Following:

    * 5 filters .239 od crush ring x .472
    * 5 upper orings .082 thick x .284 id
    * 5 intake seals .213 thick x .365 id x .628 od
    * 1 set of installation Instructions
    * Kit services the Toyota Denso Top Feed fuel injector

NOTE: See the picture for the type of injector this kit services. Injector is not included.

_This listing is for one 6 cylinder port fuel injector service kit. This kit will service the Denso Toyota top feed fuel injector. The kit includes filters, orings, intake seals, as well as a set of installation instructions.

Kit Includes The Following:

    * 7 filters .239 od crush ring x .472
    * 7 upper orings .082 thick x .284 id
    * 7 intake seals .213 thick x .365 id x .628 od
    * 1 set of installation Instructions
    * Kit services the Toyota Denso Top Feed fuel injector

NOTE: See the picture for the type of injector this kit services. Injector is not included.

_
This listing is for one 4cylinder port fuel injector service kit. This kit will service the Jecs Toyota top feed fuel injector. The kit includes filters, orings, intake seals, grommets as well as a set of installation instructions.

Kit Includes The Following:

• 5 filers .239 od crush ring x .472
• 5 upper orings .082 thick x .284 id
• 5 grommets .210 thick x .378 id
• 5 intake seals .213 thick x .365 id x .628 od
• 1 set of installation Instructions
• Kit services the Toyota Jecs Top Feed fuel injector

NOTE: See the picture for the type of injector this kit services. Injector is not included.

_This listing is for one 4cylinder port fuel injector service kit. This kit will service the Jecs Toyota top feed fuel injector. The kit includes filters, orings, intake seals, grommets as well as a set of installation instructions.

Kit Includes The Following:

• 7 filers .239 od crush ring x .472
• 7 upper orings .082 thick x .284 id
• 7 grommets .210 thick x .378 id
• 7 intake seals .213 thick x .365 id x .628 od
• 1 set of installation Instructions
• Kit services the Toyota Jecs Top Feed fuel injector

NOTE: See the picture for the type of injector this kit services. Injector is not included.