GM TBI Throttle Body Fuel Pressure Regulator Spring Item 1
Hard to find fuel pressure regulator spring for most GM Throttle body TBI 220 Units. Fits most all the trucks with a 4.3 5.0 5.7 V8 engine with TBI fuel injection.

Why replace this spring? What happens? There are lots of these trucks out there with plugged PVC systems. When that happens the crankcase does  not purge the moisture from the system. The vent tube from the valve cover dumps into a collar between the air cleaner and TBI unit. This vent then dumps the moisture right out onto the regulator / spring housing causing the spring to rust and deteriorate. In some cases the spring breaks causing low fuel pressure. If you are servicing the injectors or TBI unit you should consider replacing this hard to find spring.

Application General Motors Trucks

Throttle Body Injection TBI
4.3 V-6
5.0 V-8
5.7 V-8
$
15.00    

GM Throttle Body TBI Fuel Injector Service Kit Item 2

Applications

    * 1986-1995 GM with TBI single Injection
    * 4.3  5.0  5.7  7.4
    * 220 Rochester TBI Systems



Contents

    * 1 Upper Gasket
    * 1 Bypass Gasket
    * 1 Main Filters
    * 1 Secondary Filter
    * 1 Lower Oring
    * 1 Upper Oring
    * Installation Tips
$
19.00    

GM Throttle Body TBI Fuel Injector Service Kit Item 3
Applications

    * 1986-1995 GM with TBI dual Injection
    * 4.3  5.0  5.7  7.4
    * 220 Rochester TBI Systems



Contents

    * 1 Upper Gasket
    * 1 Bypass Gasket
    * 2 Main Filters
    * 2 Secondary Filters
    * 2 Lower Orings
    * 2 Upper Orings
    * Installation Tips
$
22.00