Help for the Do-It-Yourselfer
If you find yourself here at mrinjectorparts.com you may already have some idea of how to service your injectors. There are lots of community forums out there where hobbyists are sharing do it yourself tips with each other. I'll have to admit I am not an expert on these procedures. I have not tested any of them in the flow bench to see how well they work. I know from my 16 years experience of cleaning injectors with the ASNU ultrasonic cleaner and flow bench, some injectors are stubbornly dirty. I would be more than happy to service your injectors for you if you don't wish to have a crack at it. Click here for more info on that.
Confessions of a "Do-It-Yourselfer" Even though I would prefer to service your injectors for you I have to confess I'm a hopeless "Do-It-Yourselfer" as illustrated with my four year old Kenmore Whirlpool front load washer. Yea, I could have called the repairman to come out, diagnose the electronic issue and sell me a new $400.00 controller. But, whats the fun in that. Instead I had the top of the thing off for 2 years while Mrs.Injector washed away and I studied the elaborate functions of front load door locking. After a few years of fussing I finally replaced a board level relay and re-soldered some cold solder board circuits and "got er done." So I do understand your compulsion to "Do-It-Yourself."
More Help Coming I'll be adding to this page from time to time so keep coming back. I'll have some kit installation instructional downloads and some video clips on self cleaning procedures and kit installation.
Confessions of a "Do-It-Yourselfer" Even though I would prefer to service your injectors for you I have to confess I'm a hopeless "Do-It-Yourselfer" as illustrated with my four year old Kenmore Whirlpool front load washer. Yea, I could have called the repairman to come out, diagnose the electronic issue and sell me a new $400.00 controller. But, whats the fun in that. Instead I had the top of the thing off for 2 years while Mrs.Injector washed away and I studied the elaborate functions of front load door locking. After a few years of fussing I finally replaced a board level relay and re-soldered some cold solder board circuits and "got er done." So I do understand your compulsion to "Do-It-Yourself."
More Help Coming I'll be adding to this page from time to time so keep coming back. I'll have some kit installation instructional downloads and some video clips on self cleaning procedures and kit installation.
Kit Installation Instructions
The files below are tips for installing injectors service kits. When you order your kit you will receive a hard copy of these with the kit.
| injector_parts_installation_instructions_type_3.pdf |
| side_feed_injector_parts_installation_instructions.pdf |
| top_feed_type_1and2_kit_installation_instructions.pdf |
| delphi_injector_parts_installation_instructions.pdf |
Video Instructions
If the videos don't run in your browser use the links to YouTube. If you have the correct flash player installed they should run but I have only tested them in Internet explorer.
Injector Service Kit Installation - http://www.youtube.com/watch?v=V2sD5UsOnJs
Delphi Fuel Injector Filter Removal - http://www.youtube.com/watch?v=ZxQGHYK1q2U